Page 1 of 2
block design
Posted: 24 Feb 2017, 19:23
by waders
Like you, my new block design

Posted: 24 Feb 2017, 19:47
by theotheoderich
Too strong colors, and the angles are partly incorrect.
Here is a five minute rework.
I kept it very simple, so you can compare your picture with my.
You always have to try again. The more practice you have, the easier it gets

Posted: 24 Feb 2017, 19:51
by waders
Improved a little
Posted: 24 Feb 2017, 19:51
by Sometheotown mayor
Hey theo how's the progress on the premium stuff ?
By the way what city is that on the backround of the forum ?
Posted: 24 Feb 2017, 20:01
by theotheoderich
Sometheotown mayor wrote:Hey theo how's the progress on the premium stuff ?
By the way what city is that on the backround of the forum ?
Wrong thread for that questions

Posted: 24 Feb 2017, 20:21
by waders
corrected

Posted: 24 Feb 2017, 20:53
by theotheoderich
better, but still not the correct angle of view.
I have marked yellow where the lines are not correct. They should always go in two steps.
Please look at the template again more exact
Pixel Tutorial
Posted: 24 Feb 2017, 21:04
by waders
Posted: 24 Feb 2017, 21:19
by theotheoderich
Better, but the outlines have to be like this:
...and btw. ... your entrance door is about SIX meters high

Posted: 24 Feb 2017, 22:24
by waders
Electronics shop

Posted: 24 Feb 2017, 22:24
by Ahmad Nur Aizat
Door for giants?
Posted: 24 Feb 2017, 22:27
by waders
Posted: 24 Feb 2017, 22:29
by waders
In the projections
Posted: 24 Feb 2017, 22:47
by theotheoderich
It is from the "Snipping Tool" from MS-Office 2013.
It´s a very usefull tool for screenshots.
Back to topic...
I like the electronic market, much better than the big building.
Perhaps you should use more colors for the shadows on the right side of the building.

Posted: 26 Feb 2017, 14:10
by waders
Corrected block and shop
Super designs made just one problem that I can not write plug-and I've tried to write more than once
Posted: 26 Feb 2017, 14:19
by waders
You mean the buildings or on file with the plugin
Posted: 26 Feb 2017, 14:23
by waders
I do not because I do not know how to start
Posted: 26 Feb 2017, 14:29
by waders
[
{
"Id": "$ sample.plugin.unique.id.res00",
"typ": "mieszkalny",
"autor": "Lobby i theotheoderich",
"szerokość": 1,
"height": 1,
" ramy ": [{" bmp ":" sample_bmp.png "}],
" dym ": [{" id ":" $ smoke07 "," x ": 13," y ": - 14}],
" poziom " 1
}
]
you have to write from scratch
Posted: 26 Feb 2017, 14:50
by waders
Will you help me
Posted: 26 Feb 2017, 15:04
by Sometheotown mayor
I'm not sure about anything but i think it's "sample.bmp.png" and not "sample_bmp.png
Again i'm not sure