Hi,
this time I would like to present a selection of traffic barriers which you can use for your highways, but also avenues and other road types.
It consists of three separate plugins so that you can select the parts you want to use and leave out those which you won't need.
Here are the three parts:
traffic_barrier_median_Linetool_mdk_813.zip- (18.18 KiB) Downloaded 7490 times
It adds median barriers which are intended to be placed between the lanes of a highway.
It consists of two linetools, one with lamps, one without lamps. Personally I think the spacing between the lamps in the linetool is too narrow, but I included it anyway, because some people might feel different about it. But I also added a rotation aware puzzle piece with a lamp that allows you to create variable spacings between the lamps.
To use this you would want to draw a barrier with the linetool without lamps first and then put the single lamp piece over it whereever you want a lamp to be. I suggest to place on every second tile (see example picture above). As long as you don't draw over it with the linetool again, the barriers will retain a correct transition to the puzzle pieces.
- traffic_barrier_single_mdk_813.zip
- (26.61 KiB) Downloaded 4902 times
Note that outer corners are not included because they are unnecessary. Just leave the outer corner tiles empty.
- traffic_barrier_single_Soundwall_mdk_813.zip
- (43.88 KiB) Downloaded 4827 times
Essentially, these pieces are the same as the above single barriers just with Soundwalls added to them. You can use these pieces in conjunction with my New Soundwalls in places where you want to have a barrier at the side of the roads. Again, a linetool is not possible here unfortunately.
These pieces have the same noise reductive function as the New Soundwalls.
Please note, that here you would have to place the provided outer corner (OC) tiles.
Below is an overview of the included tools and pieces:
